ZERO LABSGet a quote
MenuClose

App development

Will your job app work without signal? A test for field teams.

A maintenance engineer finishes a job in a basement plant room in Stoke-on-Trent. They take two photos, note a part that needs replacing and mark the visit complete. Their phone has no signal. When they get back to the van, can they see what is still waiting to upload? Can the office tell which evidence has actually arrived?

Decide what must work on site

Use that example to test a job management app before buying one or commissioning your own. Try it on the oldest iPhone or Android phone your team still uses, with a dummy job and sample photos.

Start with a single job sheet. Which details does the engineer need before going inside? For a maintenance visit, that might be the job reference, the asset identifier and the checklist. Then list what they must be able to add on site. Two photos, a fault note and a completion status are enough to test the basics.

Agree how much work the phone may have to hold. A team that reconnects after each visit has a different requirement from one that works through a full shift offline. Test with a realistic number and size of photos.

Run the aeroplane-mode test

1. Open tomorrow’s job list while connected. Download or open whatever the app says staff need before travelling. Turn on aeroplane mode and check that Wi-Fi is off.

2. Open a job and record the visit. Add two photos, write a fault note and mark the visit complete. Check that the phone clearly shows the record is saved locally and waiting to send.

3. Close and reopen the app while offline. Find the job again and verify that the note, both photos and the completion status survived. Try opening a job you did not download to see whether the app explains what is missing.

4. Reconnect and interrupt an upload. Use a batch of photos large enough to see progress, then cut the connection during the transfer. Reconnect and follow the app’s retry instructions. Check the office dashboard for one job record, one copy of each photo and the correct completion status.

5. Check what the office sees before every attachment arrives. A completion status can reach the office before the photos. Agree whether to show “evidence pending” or keep the job open until all required evidence is received.

If dispatchers can change the same job while a technician is offline, add one more test. Have the office reschedule the dummy job while the engineer is adding notes. Reconnect and check that both changes survive or that the app flags the conflict for someone to resolve.

Choose the simplest option that passes

Existing job management software. Run the test on a tool you already use or a trial of an off-the-shelf product. If it handles your forms, office handover and typical offline workload, you have a concrete basis for comparing subscription and setup costs with a custom build.

Installable web app. A web app can be designed to keep job details and drafts on the device. Ask how much it can hold, what happens if storage runs low and whether staff need to reopen it to finish uploads. Browser storage limits and automatic removal under some conditions make the actual device test important.

Dedicated iPhone or Android app. Ask for a prototype when the workflow relies on a particular phone feature, a connected device or a more demanding offline workload. Apply the same test to the prototype. Put the expected behaviour in writing, especially after a restart, a failed upload or a change to a job that someone else has edited.

Put the result in your brief

Here is a sample requirement you can adapt.

A technician can open a downloaded job without signal, save two photos and a note, and close and reopen the app without losing the draft. When the phone reconnects, the office receives one copy of the job and each photo. Both sides can tell when evidence is still pending.

That gives a supplier something to demonstrate on a real device.

Take the next step.

Explore the related services and guides to plan your next step.

YOUR NEXT WEBSITE

Planning a tool around your own job sheets?.

Tell us what staff need to capture on site and what the office needs to receive.

Discuss your app workflow

Keep reading.

All articles